Neusat Neosat iPRO 2000 Plus Network (PVR) Digital Satellite Receiver w/ Remote

Description

Selling Neusat/Neosat iPRO 2000 Plus Network (PVR) Digital Satellite Receiver w/ Remote. It has been tested and is working. The remote has also been tested and is working (See the channel number change from 111 to 114 on last photo). You can see the condition in photos. In photo 8 you can see there are a few very small specs of paint on the side of it. In photo 11 you can see it is missing one of the rubber "Legs" which causes it to have a slight tilt to one side. Besides that it looks and works great. Comes with what is shown. Pricing low to sell fast.
Products Information:
Features
Fully MPEG2, DVB compliant
C/Ku band control for each antenna
Digital Audio with AC-3 support by SPDIF
PIG (Picture In Graphic) support
Provide friendly and easy-to-use menu system
Various channel editing function
(favorite, moving, locking, renaming, deleting and sorting)
User programmable various satellite & transponder information
Automatic search for newly added transponder (Network Auto Search)
Stores up to 5000 channels
Easy and speedy software upgrade through RS-232 port
Plug-and-play data transfer system (DSR to DSR)
Timer function, automatically turns On/Off by setting function
(daily, weekly, monthly and one time)
Automatic reserved channel moving system
Provide Electronic Program Guide (EPG)
Support for various video output : CVBS, COMPONENT, S-VHS
Provide various switch types, LNB types and NTSC/PAL monitor type
SCPC/MCPC receivable from C/Ku band satellite
Multi LNB controlled by DiSEqC 1.0, 22KHz and 0/12 volt switching
PAL/NTSC automatically conversion
Last channel automatically saving
Specifications
Front-End
- LNB & Tuner Input
Input frequency 950 to 2150 Mhz
Digital signal input level -65 to -25 dBm
LNB supply 13.5±0.5V / 18.5±0.7V, max.750mA
Band switch control 22KHz (Microprocessor control)
Connector 2 x F-Type, 3/8-32UNEF-2A (1 Input / 1 Loop through)
- Demodulator
Demodulation type QPSK demodulation and FEC decoding
in accordance with DVB prETS 300 421
Symbol rate (Rs) 2 < Rs < 45 Mbaud
SCPC and MCPC capable
Demultiplexing
In accordance with ISO 13818-1.
Simultaneous access will occur for the following :
- 1 video stream of data rate up to 15 Mbits/s
- 1 audio stereo/mono stream of data rate up to 448 kbits/s
32 PIDs Supported
Video Processing
Decompression MPEG-2 Main Profile @ Main Level
With Letter Box filter
Video buffer 64 MByte of DDR-RAM is provided
Data rate up to 15Mbits/s
(Max. burst rate : 228 Mbits/s)
Video output PAL-25 frame @720 x 576
NTSC-30 frame @720 x 480
Video format 4:3, 16:9
Audio Processing
Decompression MPEG-1 layer I and II, Musicam
Outputs Stereo Channel
Dual Mono
Joint Stereo Channel
Mono
Spdif with AC-3
Baseband Inputs / Outputs
- Baseband Video
Video format CVBS
Output impedance 75 unbalanced
Bandwidth 5MHz
Connector type 1 x RCA
- Baseband Audio Outputs
Connector type 2 x RCA (Left and Right)
Output impedance 600 unbalanced
Level 0.6V rms±2dB into 10k
- Digital Audio Output
Connector type Optic
Output type Spdif encoded signals with ac-3
Sampling frequency rate 32 , 44.1 or 48khz
- Component Outputs (YUV)
Connector type 3 x RCA (Y Pb Pr)
Output impedance 75 unbalanced
- S-VHS Output
Video format Y,C
Output impedance 75 unbalanced
Bandwidth 5MHz
Connector type 1 x 4pin DIN
Supply voltage to LNB
Voltage supply path DC supplied from DSR on LNB coax cable
LNB type supported LNB with integrated polarizer switch
LNB supply voltage (software selectable)
.Vertical polarization : 13.5±0.5V DC
. Horizontal polarization : 18.5±0.7V DC
FSS/BSS Switching A 22kHz±4kHz microprocessor controlled
switching signal is provided
Short circuit limit 750mA
Data Service Port
Connector 9-pin D-sub male
Data protocol RS232C interface
The DVB-DSR is seen as the Data
Communication Equipment (DCE)
and the PC (or other terminal) is seen
as the Data Terminal Equipment (DTE).
Data rate Maximum of 625K bits/s
Microprocessor
Microprocessor STi5100 AUC(STM)
Clock frequency 203MHz
SDRAM Memory 64Mbyte (DDR-RAM, 133MHz)
Flash memory 8Mbyte (4Mbit x16)
USB
USB 2.0 interface
Connector type A type
Built-in Ethernet RJ45 Port
Connector type RJ45
IEEE 802.3 / 802.3u standards
10 BASE-T and 100 BASE - TX support
Smart Card Reader
Smart card standard ISO 7816 compliant
Number of contact 8 Pin
RF Modulator
RF Output Signal NTSC M
Video Carrier Frequency 61.25 ± 90 ? US 3 CH
67.25 ± 90 ? US 4 CH
Remote Control unit
Number of keys 41 Keys
Operating distance up to 10m
Batterys 2 x 1.5V (AAA type)
Power Supply
Type Switching mode
Main input voltage 90 - 250V AC @ 50Hz/60Hz±5%
Nominal power consumption 30W
Standby power consumption 9W
Typical supply currents
- +3.3V 0.9A
- +5.0V 0.5A
- +7.0V 0.4A
- +12V 0.1A
- +22V 0.75A
Physical Characteristics
- Front Panel
Keys 5 Keys
Indicators Power on/off
Remote control input Infra-red receiver
Display 4Digit (7Segment)
Smart card reader ISO 7816 compliant
- Rear Panel
Connectors 1 LNB Input / 1 Loop through output (2F-type)
2 x Audio L/R (RCA)
1 x Video SIGNAL (RCA)
3 x YUV (RCA)
1 x RS-232 (9-pin D-sub male)
1 x RF Modulator (2F-type : IEC169-24)
1 x S-VHS (4-pin Mini-Din)
1 x Digital Audio Output (optic)
1x USB A-type
1x R J45 Type Ethernet
Switch 1 x AC Power Switch